DOOV.COM

60° Thread Calculator Table based: enter the Table 3 diameters

Type the Table 3 values for your thread on the drawing, then press Calculate. Wire size and the measurement over wires appear in red on the drawing; every result is listed below.

major pitch dia minor P 60° M external thread, section through the axis

Swipe sideways to see the whole drawing.

Thread type and class
WWire size used—
MMax M over wires—
MMin M over wires—
PPitch (1 / TPI)—

Press Calculate to show the results on the drawing and in the table below.

Diameters come from ANSI Table 3 for the size, TPI and class.

All results

Press Calculate to fill this table.

Every value the calculator produces, in the original order. Tinted, bold rows are the key results also shown on the drawing.

More tools